DIBK (Diisobutyl Ketone)

CAS:108-83-8

Characteristics:

Colorless, slightly soluble in water, miscible with most organic solvents. DIBK is levelled well on various plastics and adheres well to coatings. It can also reduce overall solvent volatility when used as an additive.

Uses: Vacuum metalizing solution, adhesive, rubber glue, developing solvent for PMMA

​​

MIBK (4 Methylpentan 2 one)

CAS:108-10-1

Characteristics: Colorless liquid. Stable. Slightly soluble in water, miscible with most organic solvents. Its vapors will form explosive mixtures with air. Strong local irritant and toxic.

Uses: Solvent, separating agent for inorganic salts, ore dressing agent, adhesive, rubber glue, developing solvent for PMMA in electron beam lithography technology

Cyclohexanone (ANONE)

CAS:18-94-1

Characteristics: Colorless oily liquid, with an odor similar to peppermint oil and acetone, turning to yellow color after staying for a long time. Miscible with most organic solvents.

Uses: Solvent, preparation of adipic acid, cyclohexanone resin, caprolactam, nylon 6

IPA (Isopropanol)

CAS:67-63-0

Characteristics: Colorless and odorous flammable liquid, miscible with water, alcohol, ether and chloroform. It can dissolve ethyl cellulose, polyvinyl butyral, various oils, alkaloids, gums and natural resins. Unlike ethanol or methanol, it is insoluble in saline solutions

Uses: Coating, solvent or cleaner for industrial processes (e.g. cleaning impurities on semiconductor wafers), pharmaceutical Uses, chemical intermediates, raw material for converting to acetone, household use and personal care products, gasoline additive

Acetone (DMK)

CAS:67-64-1

Characteristics: Colorless transparent liquid at room temperature, volatile and flammable, with aromatic odor. Miscible with water, methanol, ethanol, ether, chloroform and pyridine, an important volatile organic solvent which can dissolve oil, fat, resin and rubber as well as cellulose acetate and cellulose nitrate.

Uses: Remover for nail polish, paint thinner, organic solvent for medicines, paints, plastics, gunpowder, resins, rubber, photographic film, etc. Production of plastics, fibers, pharmaceuticals and other chemicals

PM (Propylene glycol monomethyl ether)

CAS:107-98-2

Characteristics: Transparent liquid with weak ether odor, soluble in water, methanol, and ethanol, low toxicity, with good solubility due to ether and hydroxyl groups in its structure.

Uses: Diluent for wood inks, cleaning agent for electronics, antifreezing agent, dispersing agent.

BCS (2-Butoxyethanol)

CAS:111-76-2

Characteristics: Colorless liquid with moderate ether odor. Flammable, low toxicity. Soluble in water by 20 times volume, soluble in most organic solvents such as ethanol, ether, mineral oils, etc. High dilution ratio with petroleum hydrocarbons.

Uses: Solvent for spray paints, varnishes, quick-drying paints, cellulose nitrate, enamels and paint strippers, dispersing agent for pesticides, raw material for organic synthesis, wetting agent for fibers, plasticizer for resins, analytical reagent for iron and molybdenum, etc.

NBAC (N-Butyl acetate)

CAS:123-86-4

Characteristics: Colorless transparent liquid with fruity odor. Insoluble in water, miscible with organic solvents such as alcohols, ethers and ketones, flammable. An excellent organic solvent with good solubility for ethyl cellulose, cellulose acetate butyrate, polystyrene, methacrylate, chlorinated rubber and various natural gums.

Uses: Solvent used in the production of nitrocellulose varnishes, fabrics, artificial leather and plastics, extractant in the petroleum and medical industries, ingredient for flavor compounds and flavoring agents such as banana, pineapple, apricot, and pear.

PMA (Propylene glycol monomethyl ether Acetate)

CAS:108-65-6

Characteristics: Colorless hygroscopic liquid with special odor, a non-polluting solvent with multi-functional groups. Flammable and may form explosive vapor/air mixtures at temperature above 42C.

Uses: Solvent for inks, paints, textile dyes, textile oils, cleaning agent in LCD production

​

DPM (Dipropylene Glycol Methyl Ether)

CAS:34590-94-8

Characteristics: Colorless transparent liquid with a faint ether odor. Low toxicity, low viscosity, low surface tension, moderate evaporation rate, good solubility and good coupling ability. It can dissolve oil, rubber and natural resins such as ethyl cellulose, cellulose nitrate, polyvinyl acetate, polyvinyl butyral, alkyd resin, phenolic resin, urea resin, etc.

Uses: Solvents for inks, paints, textile dyes, textile oils, cleaning agent in LCD production, coupling agent for cosmetics, stabilizer for skincare agents, agricultural pesticides and floor brighteners

DMC (Dimethyl carbonate)

CAS:616-38-6

Characteristics: Organic compound which can be regarded as the dimethyl ester of carbonic acid. Flammable clear liquid, boiling point 90 C, insoluble in water, can be used as methylating agent. Compared to other methylating reagents such as methyl iodide and dimethyl sulfate, dimethyl carbonate is less toxic and biodegradable.

Uses: Solvent for inks and paints, detergent, surfactant, gasoline additive, medicine, and pesticide

DMAC (Dimethylacetamide)

CAS:127-29-5

Characteristics: Non-protic solvent with high polarity, slight ammonia odor and strong solubility, with good solubility which can dissolve a wide range of substances, such as arbitrarily miscible with water, aromatic compounds, esters, ketones, alcohols, ethers, benzene and chloroform, etc., and it can activate the molecules of the compound.

Uses: Surfactant, electrolytic solvent, water-based PU solvent, medicine, pesticide

NMP (N-Methylpyrrolidone)

CAS:872-50-4

Characteristics: Colorless to light yellow transparent liquid, high hygroscopic, miscible with water and most organic solvents such as ethanol, ether, acetone, ethyl acetate, chloroform, and benzene. Chemically stable, but its lactam ring will be broken when exposed to acid or alkali.

Uses: petrochemicals, pesticides, medicines, electronic materials, desulfurization of syngas, recovery and refinement of acetylene, extraction of olefins, polymerization of insoluble engineering plastics, lithium battery processing

2-EH (2-Ethylhexanol)

CAS:6169-6-8

Characteristics: Colorless, oily liquid with aromatic odor Flammable. Low toxicity, slightly bactericidal. Slightly soluble in water, miscible with solvents such as ethanol, ether and chloroform.

Uses: Preparation of plasticizer dicapryl phthalate, defoaming agent, fiber oils, coal flotation agent, surfactants, pesticide emulsifiers, solvent for wax and greases

 GBL (gamma-Butyrolactone)

CAS:96-48-0

Characteristics: Hygroscopic, colorless oily liquid, with weak characteristic odor and soluble in water.

Uses: Common solvent and reagent, aromatic, detergent, remover for cyanoacrylate and paints, solvent for some liquid aluminum electrolytic capacitors. In the manufacture of lithium batteries, GBL is used as a special solution for lithium ions

DEF (N,N-DIETHYLFORMAMIDE)

CAS:617-54-8

Characteristics: Low toxicity, alternative to DMF, DMAC, NMF, compliant with EU REACH RoHS, good solubility, high boiling point, stable, solvent for high temperature resistant resins, less hygroscopic.

Uses: Solvent for polyurethanes and paints, detergent for inks and electronics, it is widely used in different areas such as lithium batteries, fiber manufacturing, pharmaceuticals, pesticides

DMAPA (N,N-Dimethyl-1,3-propane diamine)

CAS:109-55-7

Characteristics: Colorless transparent liquid, soluble in water and organic solvents.

Uses: intermediate of organic raw materials, dye, ion exchange resin, curing agent for epoxy resins, oil additive, treating agent and fungicide for fiber and leather

THF (tetrahydrofuran)

CAS:109-99-9

Characteristics: THF is a kind of cyclic ether, which is a colorless liquid with low viscosity and soluble in water at room temperature and pressure. Since it is liquid over a wide range of temperatures, it is often used as a non-protic solvent with moderate polarity.

Uses: Precursor of high molecular polymers, which can be polymerized into chained Poly(tetramethylene ether) Glycol (PTMEG) in a strong acids, also used as industrial solvent in the production of PTMO, PVC and paints.

Sogel Silica

CAS:-

Characteristics: Nano-grade spherical particles with good dispersity. Good dispersion and storage stability, concentrated particle size distribution and no agglutination. Silica particles are non-toxic and biocompatible. They have a high density of surface active functional groups, which can be used for all kinds of compatibility modification and high organic compatibility. Non-crystalline Silica particles with high light transmission and stable optical properties.

​

Uses: Inorganic filler for organic/inorganic nano-composite materials, modifier for improving hardness of optical films, additive for thin films, modifier for improving physical properties of various coatings, additive for improving mechanical and physical properties of substrates such as optical grade resins, transparent rubber and plastics and elastomers, additive of scratch-resistant coatings for 3C, automobile and motorcycle baking, additive of anti-corrosion and anti-scratch coatings for metal, plastic and optical substrate surfaces, additive for improving physical properties of flexible electrical substrates, modifier for improving properties of substrates used in variable frequency and high frequency Uses, additive for flexible plastic substrates

AA (Acetic Anhydride)

CAS:108-24-7

Characteristics: Acetic anhydride is an anhydride derived from acetic acid with the molecular formula (CH3CO)2O, often abbreviated as Ac2O. It is commonly used as an acetylating or dehydration agent in organic synthesis. Acetic anhydride is a colorless liquid at room temperature that reacts with moisture in the air, giving off the strong odor of acetic acid.

Uses: Pharmaceutical synthesis, intermediate, bleach activator, starch modifier, explosive, herbicide, pesticide